mDrawbot kit

Description

mDrawBot is the world’s most fully-featured four-in-one drawing robot. It can be assembled into 4 different configurations: mScara, mSpider, mEggBot, and mCar. This kit consists of over 60 components from Makeblock, including beams, brackets, motor, etc. It also comes with a specially-designed software named mDraw to control these robots.

Applications:

1. mScara: mScara is a SCARA (Selective Compliance Articulated Robot Arm) driven by stepper motors. Adding a pen on mScara, it can draw pictures on a flat surface. You can also turn mScara into a desktop laser engraver replacing the pen with a laser diode.
2. mSpider: mSpider is a drawing robot which can draw pictures on a wall or a white board. Two stepper motors control the movement of mSpider though strings. Theoretically, its drawing range can be expanded by increasing the length of the strings.
3. mEggBot: mEggBot is designed to draw on things that are improbable to print on, such as eggs or ping-pong balls. It can be used to write letters, draw expressions on spheroid, or draw Easter eggs.
4. mCar: mCar is a three-wheel robot car, which contains two stepper-motor-drive wheels and a ball-caster wheel. It can draw its own movement tracks on flat surface. Installing a chalk instead of a pen, it can draw on the floor.
   

   Features:

   1. Frame: Anodized Aluminum
   2. Software: mDraw
   3. Connection: USB or Bluetooth
   4. Supported File Types: .Plain SVG, .BMP etc.
   5. Supported OS: Windows7 or later, Mac OS X

    

   How to Use mDrawBot ?

   Each mDrawBot kit can be assembled into any of the 4 different configurations. We provide the detailed assembling instructions and you can build any configuration in an hour. The assembly instructions can be downloaded here: https://github.com/Makeblock-official/mDrawBot.

   • Software

   After installing the mDraw software, you can import images and make the robot draw them. mDraw is a powerful software designed for mDrawBot. Here are some features:

   • Support mScara, mSpider, mEggBot, mCar, XY
   • Support both pen drawing and laser engraving
   • Support custom settings of motor direction, drawing range, etc
   • Support saving parameters Support SVG. file
   • Support conversion from BMP to SVG
   • Support zooming, rotating, mirroring, and moving the SVG graphics
   • Support Windows7 or later. (Will be available in Mac OS X, Linux soon.)
   • mDraw is an open source project hosted on Github.

    

   General Specification
   Input Voltage	AC 100-240 V
   Input Current	0.6A
   Output Voltage	DC 12V, 2.0A
   Working Area: mScara	120° of an annulus (exradius 208mm, inradius 168mm)
   Working Area: mSpider	Undefined
   Working Area: mEggbot	Cylinder with L×D=60×（10-60）
   Working Area: mCar	Undefined
   Main Controller:	Makeblock Orion (Arduino UNO compatible)
   Shipment Weight	2.715 kg
   Shipment Dimensions	18 × 16 × 6 cm

   Please allow 5% measuring deviation due to manual measurement.

   Documentation:

   1. Github Repository
   2. Github Repository
   3. Seedstudio mDrawBot: 4-in-1 Drawing Robot
   4. Official Product Page
   5. PDF Manual
   6. Instruction Guide

    

   Package Includes:

   1 x mDrawbot kit.

   Assembly