Description
- Cockpit shell material:
- Should be ABS & steel
- The instrument panel should be configured with real car parts
- The steering mechanism should be constructed with real car steering gear assembly, and the number of revolutions of the real car should be adopted
- The gear position cover should adopt a solid one-piece real car central channel, which should feel like a real car.
Transmission:
- Should adopt the principle of a real car
- The gear positions should be reverse gear, first gear, second gear, third gear, fourth gear, fifth gear and neutral gear
- Cockpit
- The cockpit should be composed of steering gear, accelerator, clutch, foot brake, hand brake and other operating parts and seats.
- Sensors:
- Should have steering wheel (high-precision angle sensor), oil brake (non-contact magnetic sensor).
- Steering wheel:
- Should have latest technology torsion spring force
- Car seat
- Should be a professional car seat, beautiful and Should have adjustable front and rear and should be suitable for teenagers.
Other components:
- Must have left tum signal, right turn signal, emergency light, horn, ignition switch, main switch, wiper, high beam, low beam.
- Software driving main interface:
- After the start-up screen, the lower part of the interface should display at the same time
- The progress of accelerator, brake, steering, and clutch depth all should be
- Should be a 120-degree new wide-angle broadband driving simulation
- The interface should display various indicator lights, text prompt boxes, gear positions, training results, and the rearview mirror (left, right, center) should be adjusted
- to change the viewing
- All visual scenes should be generated by computer in real-time three-dimensional
- The multi-degree-of-freedom mathematical model should realize the realistic simulation of car steering, braking and acceleration.
- Working environment and specifications:
- Dimensions (mm): Min. 22inch x 3 display (length 1480x width 1370x height 1280)
- Entrance width (mm): Min. 850 or higher
- Mulb-Display, 3 Min. 22 inch LCD display
- Display maximum resolution: Min, 5760×1080 or better
- Power Consumption: 420W or higher
- Working voltage: AC220V±50HZ
- Working temperature: 10°C-40°C
- Relative humidity: 20%-90% PC Parameters:
- Item name: Third generation computer host
- Motherboard: 3rd Generation, H61 or better (1pc)
- CPU: Intel 13 3220 or better (1pc)
- Hard diskc Solid State M2 60G or better (1pc)
- Memory: DDR3 4G (1600) Third generation memory or better (1pc)
- Power supply: 350W (1set)
- Graphics card: GALAX GTX 750 or better (1pc)
- Monitor: 22 inches (3pcs)
- System: Win 7 64 bit or better
- Training Program should be present in software:
- Subject 1, Subject 4:
- Citing the driving test book
- Basic driving
- Practice steering wheel
- Practice pedal
- Practice shifting
- Start straight drive stop
- Subject 2 road driving (car):
- Ramp fixed point stop and start
- Side parking
- Warehousing
- Quarter turm
- Curve driving
- Comprehensive practice exam
- Subject 3 road driving
- Start
- Change lane
- Pull over
- Go straight through the intersection
- Turn left at the intersection
- Turn right at the intersection
- Pedestrian crossing
- School area
- Bus stop
- Meeting car
- Overtake
- Tum around
- Comprehensive practice exam
- Free driving:
- Urban road
- Mountain road
- Expressway
- Tunnel section
- Wading section
- Country road
- Muddy road
- Stone pavement
- Emergency handling experience:
- Steering out of control
- Handling of steering failure
- Disposal of vehicle puncture
- flameout without oil
- Sudden heavy rain
- Pedestrians avoid
- Engine catches fire
- Rock fall
- High-speed card access
- Narrow rood meeting
- Vehicle selection:
- OUS (DUS)
- Citroen
- New Santana
- Ling Shay
- Santana
- Big truck
- V5
- Weather selection:
- Sunny
- Cloudy day
- Rainy day (adjustable)
- Snow (adjustable)
- Fog (adjustable)
- Night
- Pedestrian density regulation: 0-30
- Venire density regulation: 0-30
- Basic Configuration:
- Following items should be supplied with the simulator:
- USB A/D converter multifunction card (1set) should be installed on the simulator
- Mouse (1pc)
- Audio: Earphone (1pc) should be installed on the simulator
- Software (Iset) should be installed on the simulator
- Genuine dongle (Iset) should be installed on the simulator
- Dashboard (1pc) should be installed on the simulator
- Combination switch Real vehicle (1pc) should be installed on the simulator
- Instrument assembly Model (1set) should be installed on the simulator
- Seat belt: Three-point (1pc) should be installed on the simulator
- Headlight switch: Combination switch integration (1set) should be installed on the simulator
- Emergency light: Combination switch (1pc) should be installed on the simulator
- Small light: Combination switch (1pc) should be installed on the simulator
- Fog light: Keyboard (Iset) should be installed on the simulator
- Mechanical steering wheel: The latest technology torsion spring gear combination structure (1set) should be installed on the simulator
- Steering wheel sensor: High precision angle sensor
- Brake sensor: Non-contact magnetic sensor (1pc) should be installed on the simulator
- Throttle sensor: Non-contact magnetic sensor (1pc) should be installed on the simulator
- Clutch sensor: Non-contact magnetic sensor (1pc) should be installed on the simulator
- Handbrake: Contact type (1pc) should be installed on the simulator
- Steering wheel: Real object (1pc) should be installed on the simulator
- Seat chair: Universal (1pc) should be installed on the simulator
- Accelerator: Dedicated (1pc) should be installed on the simulator
- Clutch pedal: Dedicated (1pc) should be installed on the simulator
- Brake pedal: Dedicated (1pc) should be installed on the simulator
- Transmission assembly: Dedicated (1pc) should be installed on the simulator
- Exterior material: ABS plus steel structure plus glass fiber reinforced plastic (1set) Vehicle Simulation Teaching Software:
- Should be supplied with following specified software for vehicle simulation teaching:
- Software should have six modules inducing electric engine, automatic transmission, ABS, power steering system, electric system and electrically controlled suspension system.
- The system should adopt C/S structure, with network only transmitting system data, ensuring the favorable operation performance of customer terminal software without the influence of the network flow.
- It should adopt 30 virtual mode to represent parts and components of all assemblies and the position relations among them and all assemblies and parts and components should be allowed to be zoomed in and out, rotated, removed, etc.
It should adopt two fault setting manners-manual and random. Faults should be displayed and relevant simulation detection instrument, decoder, oscilloscope, multi meter and the like function to detect faults and make troubleshooting.
