Description

The Electrical Wiring Trainer Board should consist of below:

Electrical Training System: Provide available electrical components and interconnect in different configurations.

Acquire    the   basic    knowledge   on   electrical    engineering,    installations    and   electrical measurements.

Study the means to check the main laws and principles.

Component symbols and electrical diagrams are represented on the front panel.

The symbols and electrical diagrams of each component are clearly represented on the front panel.

The connections are eased by 4mm terminals and cables of different colors. The power supplies are included with extra low safety voltage.

General switch, fuse and signaling lamp:

Safety single-phase transformer 115-230V/ 6-12-24 VAC-1 A Fuse-holder with fuse type 6×30-1A

Moving iron ammeter with range: 0.5-1A Moving iron voltmeter with range: 25 V

Resistors of different values (2, 4, 8, 16, 31.5, 63, 250, 500, 1000, 2000) linear rheostat 100/25W

Diodes 6A-100V

Lamp-holder with 24-V signaling lamp 24-Vac buzzer Electrolytic capacitor, 100 F25Vdc Electrolytic capacitors, 500 F25Vdc Inductances 60 mH 0.5 A

Electrical Sequence Trainer: Hands-on electrical sequence practices using various electrical components with electric contact. Simulates real life components and power source that is being

used in the field Ensures safety using insulated connection cables and insulated connection terminals

Experimental Contents:

Basic circuit Logic circuit

Self-holding circuit Timer circuit Priority circuit Detection circuit Lamp and alarm circuit Motor

operational circuit Reactor-driving circuit Jog circuit

Forward & reverse circuit Delay operation circuit Time activation circuit Y-Δ operational circuit

Earth leakage circuit breaker (ELCB): 1 Nos Rated voltage: AC 220V 60Hz

Rated current: 30A

Rated residual current: 30mA Electronic contactor (5a2b): 3 Nos

Contact capacity: AC 240V/18A / 4.5kW Auxiliary contact capacity: AC 240V 3A Electronic overload relay (EOCR, 1/2HP): 1 Nos Internal CT (sensor): 3-CT (tunnel type)

Current setting: 0.3 ~ 1.5A Trip time setting: 0 ~ 30 sec.

Contact capacity: AC 250V 3A (Resistive load) Relay (4C):2 Nos

Contact capacity: AC 220V 3A (Resistive load) Timer (30 seconds): 1Nos Operational method: ON delay

Output contact capacity: AC 220V 1.5A (Resistive load) Flicker timer (6 seconds): 1 Nos Operational method: ON Start

Output contact capacity: AC 220V 2.5A (Resistive load) 3-phase induction motor: 1 Nos Operating voltage: 3-phase AC 220V / 380V / 25W

Type of motor: Squirrel cage rotor, 4-pole and Y-Δ Starting Rotary disc: Rotational speed detection type

Electronic brake: Intensity control function Proximity sensor: 1Nos Digital counter: 1Nos

DC power supply: 1ea Output: DC 24V 1A (fuse) Lamp: 4 Nos Buzzer: 1 Nos Push button: 4 Nos

Toggle switch (1a1b): 2 Nos Fuse and fuse holder: 2 Nos Supports angle adjustment: 1 Nos

STANDARD ACCESSORIES:

Power cord: 1Nos

4ø insulated connection cable: 1set User’s guide & experimental manual: 1set

Digital Multifunctional Meter:

Showing electrical wiring tips on the LCD screen User-defined backlight setting (10/20/30 sec.)

±0.2% precision

Fast and accurate response rate Effective measurement of RMS values

Indication of a measured data in the minimum, maximum and average values Earth resistance measurement in two points and three points

Automatic Power OFF function Bluetooth communication

Displays the connection of reed wires AUTO/MANUAL range selection Initiation of calibration by pressing a key button ACV: 0.0-750.0V True RMS DCV: 0.0-999.9V

Insulation resistance (MEG Ω):

DC 1000V: 0.00MΩ ~ 9.99MΩ, 10.00MΩ ~ 99.

99MΩ