Electrical Power Transmission Line Trainer

Description

Technical Parameter:
– The functional modules of Trainer bench model equipment
– Artificial transmission line model.
– Generating TX model, Grid TX model.
– VAR Compensator & RLC loading model.
– Simulator instruments and protections scheme
– Input voltage min. 380V then step down in grid Tx model is 300V
– Then step down by substation model in 250V
– And transfer voltage 220 to 250 volt to our locality.

Transformer 300VA: 3EA
– Primary: 0/110/220/380V
– Secondary: 0 / 110 / 220 / 380V
– Resistive Load (550 Ω, 1100 Ω, 1600 Ω ±10%,200W): 3 EA
– Inductive Load (1h,2h,3h, ±10%,): 3 EA
– Capacitive load (1.5uF,3uF,4.5uF, ±10%,): 3 EA
– Fan cooling system: 6 EA

External AC connection facility
The experimental studies with Equipment
Ferranti effect ? Voltage profile of transmission under no-load condition
ABCD Parameter Experiments
– Surge impedance loading, current at SIL
– Line loss and Line efficiency calculations
– Line voltage regulation studies
– Power handling capacity of the transmission line
– with different operating voltages
– Line VAR compensation and load VAR
– Compensation studies.
– Voltage improvement through tap changing
– Transformers studies.
Accessory: Experimental Manual: 1copy; Connecting Cord: 1unit; Safety & Security: Over voltage, over current and earth fault protection must be ensured for the above-mentioned Electrical Power Transmission Line Trainer.
Warranty: 2 years